光纤清洁产品


FIBER OPTIC CLEANING PRODUCTS

Connecting At The Speed Of Light™

我们为光纤连接器开发了高质量的光纤清洁产品。清洗光纤连接器可以明显改善传输速率,进而得到更高的带宽,并且不需要后续维护。jumpers而不需要更换。我们的产品性能超出IEC 61300-3-35, IEC TR62627-01的要求,并且符合Telcordia GR-2923-CORE and SAE Aerospace AIR6031。

FOCCUS产品是为连接器设计的使用组合清洗工艺。连接器的端面会用轻微潮湿的无尘布擦拭,然后进行干燥操作。大型清洗平台保证合适的角度来清洗UPC和APC连接器。只需要一次清洗就可以完全除掉连接器上常见的污染,例如:污垢、手指油、矿物油和润滑脂、凝胶、牵引润滑油、灰尘、污垢、碳、水。此外,其他还有许多清洗套装在使用中我们的产品性能被证明超出IEC 61300-3-35, IEC TR62627-01的要求,并且符合Telcordia GR-2923-CORE和SAE Aerospace AIR6031。

干洗可能会造成二次污染,但可能会残留没有清洗干净的颗粒,还会形成一个静电场,吸引并附着在额外的污染。湿清洗会润湿连接头,会像IEC 61300-3-35展示,从金属头周围沾染污染物。这些污染物会造成清洗过程失败,大部分残留污染物为颗粒。如果没有组合清洗套装的清洗,需要做额外的清洗工作、并且按照需要更换jumper或链接器。点击这里获取更多信息。化学电子为组合清洗工艺提供认证培训,为“正确”的清洗产品提供“正确”的清洗培训。

请拨打电话+ 1-800-646-5244,140,我们会安排技术专家给您做现场培训!

Fiber Optic Kits Fiber Optic Tools

RESOURCES:

FOCCUS OSP Flyer
FOCCUS CCT Brochure
Telecommunications Catalog

YouTube Training

White Papers:

Product Information:

Application Guides:

FIBERWASH NF PRECISION FIBER OPTIC CLEANING PEN

Nonflammable, fast drying fiber optic cleaner

  • Specifically formulated for cleaning all fiber optic connectors
  • Removes handling soils, dust, oils and airborne contamination
  • Effective for the widest range of contaminants
  • Nonflammable and low odor
  • Residue free, fast evaporating and low VOC
  • Portable and easily transportable
  • Cleans alone, with the QbE® Cleaning Platform, or with the CCT™ Clear Connection Tool



CLEAR CONNECTION TOOL

For Fast, Effective Fiber Connector End-Face Cleaning

  • Cleans connectors on back plane and on jumpers
  • Uses Combination Cleaning™ process for first time cleaning, every time
  • Effective for the widest range of contaminants
  • Easy to use for quick and reliable cleaning
  • Rugged and durable, great for all work sites
  • Cleans UPC and APC connectors
  • Up to 800 cleanings per kit -- 33% more than other tools!

Click here for more information


Combination Cleaning™ - Clean First Time... Every Time

FOCCUS products are designed for optimal cleaning of connectors using Combination Cleaning process. The end face is passed through a lightly moistened spot on the lint-free wiper, then drawn into the dry area. The large cleaning platform assures the proper angle for UPC and APC connectors.

Combination Cleaning gives you 1st time cleaning for all common connector soils:

  • Finger oils
  • Mineral oils and grease
  • Gels & pulling lubricants
  • Dust, dirt & carbon
  • Water & salt residue
    & more

Combination Cleaning is industry proven, exceeding IEC 61300-3-35, IEC TR62627-01, and meeting Telcordia GR-2923-CORE and SAE Aerospace AIR6031.

Dry media can smear oils, not fully remove dry particulates, and can create a static field that attracts and holds onto additional debris. Wet cleaning can oversaturate connectors, drawing up contamination from around the ferrule as shown in IEC 61300-3-35. The result is unreliable cleaning processes that work on some, but not all soils. Without Combination Cleaning, additional cleaning passes, replacement jumpers or connectors may be required.

Click here for more information


Chemtronics offers certification training for the Combination Cleaning process, teaching the right process with the right products. Call 1-800-646-5244 x140 to schedule your hands-on training with our technical experts!